KINGSTON HYPER-X 4GB DDR3 1333MHZ

KINGSTON HYPER-X 4GB DDR3 1333MHZ
  • JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85C, 3.9us at 85C < TCASE < 95C
  • Asynchronous Reset
  • PCB : Height 1.180 (30.00mm), double sided component

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 2503
  • Product Code: ME9197
  • $55.00
Real Time Analytics